Many cars today are equipped with cameras and sensors that help with safety features like lane assist or emergency braking. When the windshield of a car is replaced, these cameras and sensors may not work properly unless they are recalibrated. And if they are not set correctly, your car’s safety systems might fail when you need them most.
However, knowing whether you need to get your windshield recalibrated after replacement can be difficult. In this blog by Aim Auto Glass, the best auto glass repair shop, we will look at how to know if your windshield needs recalibration, the different types of recalibration, signs to watch for, and why it’s risky to skip. So, read on!
Types of Recalibration Available in Abbotsford
Before we dive deep into knowing if your windshield needs recalibration after replacement, let’s first understand the types of recalibration that can be done on your vehicle. Generally, two types of recalibration is done on a vehicle after windshield replacement, including:
- Static recalibration: This is done inside a workshop. The car is placed in front of a special tool that helps reset the camera and sensors.
- Dynamic recalibration: This is done while driving. A technician drives the car at a set speed on clear roads so the system can reset itself.
Some cars may need only one type, while others may need both types of recalibration. The right method depends on your car’s make and model.
Signs Your Windshield Needs Recalibration
After getting a new windshield, your car may give you clues that the cameras or sensors are not working properly. Here is a list of some common signs your windshield needs recalibration:
- Warning lights turn on in your dashboard
- You see error messages on your car’s screen
- Lane assist or cruise control doesn’t work like before
- Your car feels unsafe when using driver-assist features
- Safety features, like automatic braking, seem slow or stop working
If you notice any of these signs in your vehicle, it’s best to get your windshield checked and recalibrated by professionals.
Why Skipping Recalibration is Risky
Skipping recalibration may seem like a small thing, but it can put you in danger. If the cameras and sensors are not set right, you may experience the following problems:
- Your vehicle’s safety systems may fail when you need them most
- Cruise control or lane assist may not work correctly
- Automatic braking could react too late or not at all
- Your car may not pass safety checks or inspections
- You may not get warnings about cars, people, or objects around you
By setting all the cameras and sensors right, you can ensure that all the safety features of your car keep working the way they should.
Read Also - Why You Can't Ignore Windshield Calibration?
Conclusion
Modern cars often have cameras and sensors that help with safety features like lane assist or emergency braking. During windshield replacement, the placement of these cameras might be affected. To ensure the safety features keep working like they should, you must get the windshield of your car recalibrated.
Otherwise, the safety systems may not work when you need them most, or your car may not pass safety checks or inspections. All the necessary information you need regarding windshield recalibration is mentioned above in this blog. For high-quality windshield recalibration services, contact the best auto glass repair shop in Abbotsford.
FAQs
Q. Do all cars need windshield recalibration after replacement?
No, but most newer cars with cameras or sensors on the windshield do.
Q. How long does recalibration take?
It usually takes 30 minutes to a few hours, depending on the type of recalibration being done.
Q. Can I drive my car without recalibration?
Yes, you can, but it’s not safe. Your safety systems may not work correctly.
Q. Is windshield recalibration expensive?
The cost varies, but it’s often cheaper than repairs or accidents caused by unsafe systems.
